Temperature and Vibration Monitoring System on Electric Motors From Wireless Remote Control Using Blynk App
DOI:
https://doi.org/10.71225/jstn.v1i1.40Keywords:
Thermocouple sensor, Piezoelectric sensor, Blynk, Temperature and VibrationAbstract
The purpose of this research is to create a device that can track the temperature and vibration of an electric motor. It has two sensors: a thermocouple sensor and a piezoelectric sensor. When the electric motor is operating, the device displays digital data in the form of numbers on the monitor screen wirelessly. This research shows that the electric motor can be effectively monitored remotely. The Blynk app can connect with the unit within 0-200 meters without any obstacles. However, if the unit is blocked by a barrier, the distance that can be covered by the Blynk application is 0-160 meters. The test results show that the average electric motor temperature measured is 31.7°C, and the percentage of error value obtained is -1.01%.
References
Marselinus, M. (2016). Fire Alarm System Using Infrared and Temperature Sensors based on Arduino Uno. Department of Physics, Faculty of Science and Engineering, Nusa Cendana University.
Fraenkel, J. R., Wallen, N. E., & Hyun, H. H. (2012). How to design and evaluate education research (8th ed.). New York: McGraw Hill.
Haris, M. Yusrifar & Aryo Abdi Putra. (2017). Design of a Light Control System Based on an Arduino Uno R3 Microcontroller with a Sound Sensor. Makassar: Muhammadiyah University of Makassar, Faculty of Engineering.
Santoso, Hari. (2015). A practical guide to Arduino for beginners. www.elangsakti.com: Malang
Sadewo, D. N., & Wirawan, W. A. (2023, March). Maximum Power Tracking Photovoltaic Polycristalin and Monocrystalline Optimized with Algorithm Dual Axis Solar Tracking Using Four LDR Comparator Sensor. In International Conference on Railway and Transportation (ICORT 2022) (pp. 285-293). Atlantis Press.
Zaratul, Nisa, and Saputri. 2014. Voice recognition is applied to control electrical equipment based on Arduino Uno. Brawijaya University.http://repository.ub.ac.id/id/eprint/142674/
AJTekno, Turning on the lights with applause based on Arduino
Sunardi, S., Arifianto, T., Hartisa, A. L., Darmawan, A., & Wirawan, W. A. (2020). Perancangan Sistem Peringatan Longsor dan Deteksi Pergeseran Tanah Menggunakan Metode Telemetri. Jurnal Penelitian Transportasi Darat, 22(2), 123-130.
Wirawan, W. A., Aghastya, A., & Lailya, A. L. (2019). Modeling Of Atmega 2560 Microcontroller-Based Train Passenger Counter. Jurnal Perkeretaapian Indonesia (Indonesian Railway Journal), 3(1).
Abidi, Zainal. 2014. Backup power provider with inverter. INTEKNA Journal. Banjarmasin State Polytechnic
Rachman, N. F., Sunardi, S., Aghastya, A., Wirawan, W. A., & Putri, N. D. O. (2023, May). Simulation of early warning system in landslides and flooding with IoT. In AIP Conference Proceedings (Vol. 2592, No. 1). AIP Publishing.
Mulyati, Sri and Sumardi. (2018). Internet of Things (IoT) on Gas Leak Detector Prototype Based on MQ-2 and SIM800L. Engineering Journal: Muhammadiyah University of Tangerang, Vol. 7, no. 2.
Sasmoko, Dani. (2021). Arduino and Sensors in DIY Arduino Projects. Semarang: Prima Agus Teknik Foundation.
Sugiyono. (2019). Quantitative, Qualitative, and R&D Research Methods. Bandung: Alphabet.
Sukmadinata, Nana Syaodih. (2009). Educational Research Methods. Bandung: Rosdakarya Youth.
Andri Hendrawan, S. S. (2021). Penyebab Kerusakan Electro MotorOil Max Pump pada Mesin Induk di KM. Dharma Kartika IX. Jurnal Saintara Vol.5 No.2, 28-35.
Happyanto, D.C., & Purnomo, M.H. (2014). Teknik kendali motor induksi tiga fasa : berbasis kecerdasan komputasional sebagai penggerak mobil listrik. Yogyakarta : Graha Ilmu.
Musyaffa, I. F. (2019). Monitoring Temperatur dan Getaran Motor Induksi 3 Phase Menggunakan Arduino Uno (Doctoral dissertation, Universitas Islam Indonesia).
Prayogo, D. (2019). Analisis Pengaruh Kerusakan Rotor Pada Motor Induksi 3 Phasa Dengan Metode Motor Current Signature Analysis (MCSA). Skripsi. Universitas Pamulang.
Rizeki, R., & Iwan, K. (2016). Monitoring Suhu Generator Berbasis Internet of Thing (IoT) Menggunakan Mikrokontroler NodeMCU Sebagai Implementasi ICT Pada Bisnis Pembangkitan Tenaga Listrik. Skripsi. Universitas Mercubuana. Jakarta.
Tugino, Harianto, Widian C. (2016). Rekayasa Peralatan Pendeteksi Dini Kerusakan Pada Motor Listrik Berbasis Komputer. STTNAS, Vol.1 No.1 (12-17)
