Railway Bridge Design Analysis With Deck Bulb Tee WF98DG Type Bearer Using Bridgelink V.8.0.0.2

Authors

  • Aco Wahyudi Efendi Universitas Sebelas Maret Surakarta
  • Novia Safitri Politeknik Negeri Samarinda

DOI:

https://doi.org/10.71225/jstn.v1i2.52

Keywords:

Bridgelink, Deck Bulb Tee, Girder, Railroad, Stress

Abstract

The railroad track is crucial for people to cross the train, especially on lines with quite high elevations where the railroad is not permitted to have particularly high gridlines on its tracks. In its literal sense, a bridge is a construction that connects two areas that are divided by a barrier, which can be man-made or natural, such as highways, irrigation canals, and railroads, or it can be a river, valley, strait, or sea. The researcher will model the bridge girder with Bridgelink software for tracks on public railways, using pre-stressed concrete material with the type of grinder is Deck Bulb Tee WF98DG with a bridge span of 30 m. Referring to the railway geometry planning parameters according to the Minister of Transportation regulation No. PM. 60 of 2012. From the results of this study it is known that with a bridge cross-section of 3.124 m wide according to the needs of the width of the cross-section of a one-lane railway, which is a minimum of 3 m with a span length of 30 m using a single axle load of 20 tons requires a girder cross-section type Deck Bulb Tee WF98DG with the number of straight strand recommendations from bridge link is 18 pieces and Harped Strand as many as 7 pieces using fc' 35.16 MPa.

References

A. W. Efendi, “Behavior of Railroad Bridge Girders Due to Brake Loads with LISA V. 8 FEA,” … Conference on Railway and Transportation (ICORT …, 2023, [Online]. Available: https://www.atlantis-press.com/proceedings/icort-22/125985594

M. Su, Y. Yang, and R. Pan, “A comprehensively overall track-bridge interaction study on multi-span simply supported beam bridges with longitudinal continuous ballastless slab track,” … Engineering and Mechanics, An Int’l Journal, 2021, [Online]. Available: https://www.dbpia.co.kr/Journal/articleDetail?nodeId=NODE10696911

A. W. Efendi, “Behavior of Railroad Bridge Girders Due to Brake Loads with LISA V. 8 FEA,” … Conference on Railway and Transportation (ICORT …, 2023, [Online]. Available: https://www.atlantis-press.com/proceedings/icort-22/125985594

M. Su, Y. Yang, and R. Pan, “A comprehensively overall track-bridge interaction study on multi-span simply supported beam bridges with longitudinal continuous ballastless slab track,” … Engineering and Mechanics, An Int’l Journal, 2021, [Online]. Available: https://www.dbpia.co.kr/Journal/articleDetail?nodeId=NODE10696911

X. Chen, L. Pan, L. Xu, and C. Shi, “Three-Dimensional Vehicle–Curved Track Dynamic Model Based on FEM and DEM,” … Journal of Structural Stability and …, 2021, doi: 10.1142/S0219455421501790.

A. W. Efendi, “Behavior Analysis of Building Structures After a Fire with FEA LISA V. 8,” Kurva S: Jurnal Keilmuan dan Aplikasi Teknik …, 2022, [Online]. Available: http://ejurnal.untag-smd.ac.id/index.php/TEKNIKD/article/view/6413

P. M. Gullett, M. M. Dickey, and I. L. Howard, “Finite Element Analysis of Highway Bridges Subjected to Hurricane Storm Surge via the AMBUSH Framework,” Journal of Bridge Engineering, 2020, doi: 10.1061/%28ASCE%29BE.1943-5592.0001602.

J. M. Carbonell, L. Monforte, M. O. Ciantia, M. Arroyo, and ..., “Geotechnical particle finite element method for modeling of soil-structure interaction under large deformation conditions,” … and Geotechnical …. Elsevier, 2022. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S1674775521001943

S. A. Meftah, “Formulation of Two Nodes Finite Element Model for Geometric Nonlinear Analysis of RHS Beams Accounting for Distortion and Shear Deformations,” International Journal of Steel Structures. 2022. doi: 10.1007/s13296-022-00617-y.

A. Recep and S. Sedat, “Investigation of the Consolidation Behavior of Soft Soil Improved with Vertical Drains by Finite Element Method,” International Journal of Engineering and Applied …, 2021, [Online]. Available: https://dergipark.org.tr/en/pub/ijeas/issue/66141/1002115

X. Tong, Q. Ma, and X. Yang, “The finite element analysis of magnetic storm geoelectric field based on the three-dimensional electrical structure,” 2017 IEEE Conference on Energy Internet and Energy System Integration (EI2). IEEE, 2017. doi: 10.1109/ei2.2017.8245386.

T. Albahkali, N. Alsanabani, and ..., “A Concept to Estimate the Life Cycle of the Railway Track Using Finite Element Modeling,” … International Journal …, 2021, [Online]. Available: http://journal.multiphysics.org/index.php/IJM/article/view/762

P. Singh and S. P. Harsha, “Finite Element Analysis of Cartridge Tapered Roller Bearing of Freight Wagon,” International Journal of Vehicle Structures and …, 2018, [Online]. Available: http://ischolar.info/index.php/IJVSS/article/view/185330

A. W. Efendi, Y. Do, and N. F. Rachman, “Behavior of Rail Ballast Layer Using Mortar Foam with LISA-FEA,” Journal of Railway Transportation and …, 2022, [Online]. Available: https://www.jrtt.org/index.php/jrtt/article/view/8

T. M. Gondhalekar and S. K. Panigrahi, “Transient Analysis of Railway Sleeper using Three-Dimensional Finite Element Method,” Journal of The Institution of Engineers …, 2021, doi: 10.1007/s40030-021-00582-5.

H. M. Elsanadedy, Y. A. Al-Salloum, M. A. Alrubaidi, and ..., “Finite element analysis for progressive collapse potential of precast concrete beam-to-column connections strengthened with steel plates,” Journal of Building …, 2021, [Online]. Available: https://www.sciencedirect.com/science/article/pii/S2352710220335087

T. M. Lenkovskiy, V. V. Kulyk, Z. A. Duriagina, L. V. Dzyubyk, and ..., “Finite elements analysis of the side grooved I-beam specimen for mode II fatigue crack growth rates determination,” Journal of Achievements in …. 2018.

S. Zhu, Y. X. Zhang, and C. K. Lee, “Finite element analysis of hybrid fiber reinforced engineered cementitious composite link slabs,” … Journal of Computational Methods, 2023, doi: 10.1142/S0219876221430222.

V. C. Chavan and S. Mikkili, “Repositioning of series-parallel, total-cross-tide, bridge-link, and honey-comb PV array configurations for maximum power extraction,” IETE Journal of Research, 2023, doi: 10.1080/03772063.2021.1986151.

S. Harada, “Canonical components of character varieties of arithmetic two-bridge link complements,” European Journal of Mathematics, 2023, doi: 10.1007/s40879-023-00640-1.

H. Goda, C. Hayashi, and H. J. Song, “Dehn surgeries on 2-bridge links which yield reducible 3-manifolds,” Journal of Knot Theory and Its …, 2009, doi: 10.1142/S0218216509007233.

Downloads

Published

2024-05-28

How to Cite

efendi, aco, & Safitri, N. (2024). Railway Bridge Design Analysis With Deck Bulb Tee WF98DG Type Bearer Using Bridgelink V.8.0.0.2. SAINSTECH NUSANTARA, 1(2), 1–16. https://doi.org/10.71225/jstn.v1i2.52

Issue

Section

Articles